Configuring TeltoCharge to work with the Epic backend

1. Download and install the Teltonika Energy app on your smartphone. You can find it on:

2. Enable Bluetooth on your smart device.

3. Open the Teltonika Energy app and tap the "Add new device" button.

4. Wait until your phone detects a Teltocharge device, then select an EV charger from the list.

5. After a few seconds, a pairing table will appear, requesting a code to complete the pairing process.

6. Input the last 6 digits of the security code and tap the 'Pair' button.

7. Navigate to Settings, then go to Connectivity, and select the 'WiFi' tab. Choose your network from the list, enter the password, and click connect.

8. Navigate to the 'OCPP' tab.

Toggle the 'Enable OCPP' button to the 'On' position.
Configure the URL on the charger as follows: wss://ocpp.epiccharging.com
We recommend using the serial number of the charger as the 'Charger point identity'.

By following these steps, you can easily configure a TeltoCharge.

See also Adding New Chargers